free motion embroidery Archives - Page 2 of 2

Block printing

Post author:clobbercreations
Post published:November 4, 2016
Post category:Craft Skills Craft Tools
Post comments:1 Comment

I mentioned in my post on the stitching, sewing and hobbycrafts show about my purchases for block printing and I thought I’d review the tools purchased.

I bought two blocks from The arty crafty place stall at the show. Also, I picked up some leaf shapes from another stall which I felt could be used for block printing.

I didn’t buy the tempting starter kit, as I felt i had enough tools at home. I have fabric paints which I was inspired to buy from taking a textiles class last spring, and I have tray from a lino printing kit. I found a foam sheet to place beneath the fabric and sacrificed a new washing up sponge for the activity too.

Using a tray is beneficial as you can mix your colours to produce new colours or you can create blends as you print. below is a selection of samples I produced from the blocks.

I hate to waste samples though, and I ended up transforming this sample into a birthday card. As I hadn’t intended to turn it into a card originally, I had to think about where to cut the piece.

I decided to use free machine embroidery to stitch around the shapes. I began using metallic threads and then tried some others to create a bit more definition.

Naturally, the blocks from The arty crafty shop worked better and were easier to use than the cheaper leaves I bought, but they both proved to be effective with practice. The arty crafty shop have so many lovely designs and I could have easily chosen many more, but I feel that the two selected will be versatile for a range of uses.

The air erasable pen

Post author:clobbercreations
Post published:October 21, 2016
Post category:Craft Tools Dressmaking Sewing
Post comments:0 Comments

At the end of September, I bought my first air erasable pen and thought I’d share my first few weeks’ experience with it.

The air erasable pen I got at the the stitching, sewing and hobbycrafts show at Westpoint, Exeter, was from Barn Yarns.

As you can see from the images, there are two ends to this pen. There is a fine point and a thicker nib. the difference between these two nibs can be seen in the image below:

I like the use of two different thicknesses because it suits the purposes I use it for very well. I can use the finer point to create much more precision on intricate machine embroidery designs which need to be mapped out on the material before stitching. However, the thicker nib is useful for making marks dressmaking as it show up better and doesn’t disappear quite so quickly! However, I have used it for larger embroidery designs. For example, I have begun making some new tote bag designs for Christmas which include larger stitched words than I normally produce. I write with the machine freehand in general, but as the words are a lot bigger than I’m comfortable with, it was good to use the thick nib of the pen to draft it out before I began.

The directions for this pen advise that the markings will disappear between 24-48 hours in general, but it depends on the location. Humidity plays a factor, and I found that the stag design markings with the fine point disappeared within 24 hours. Cornwall is quite humid, so I expect that other locations may find the markings last longer! I think it depends on the fabric too.

The time it takes to disappear can be an advantage and disadvantage. For me, it’s great for a project I am going to make straight away, as the markings are there for as long as I need, and will disappear on their own without the need of water, which removes the risk of shrinking the fabric (if it gets to wet) or causing the thread to run. However, it would not be so good if you used it for a dressmaking project which you could not complete within a weekend, as there’s a good chance your markings will disappear if you take too long! In this instance, I’d probably stick to the water soluble pen variety, which tends to last much longer in my experience.

Overall though, this pen has improved the way I make certain items and I have used it a lot in a short space of time. It will be interesting to see how long it lasts before I need to purchase a new one!

#pic2stitch #1 The Man Engine

Post author:clobbercreations
Post published:August 25, 2016
Post category:Craft Skills Free Machine Embroidery Inspiration
Post comments:2 Comments

For my first #pic2stitch challenge, I decided to focus on The man Engine.

For anyone who missed it, The Man Engine is a mechanical puppet of a miner which is 4.5 metres tall when crawling and 10 metres tall when standing.

We were lucky to be able to travel to St Austell during one of the puppet’s transformations. There was a big crowd, so we couldn’t see at first, but the organisers were really good in encouraging the crowd to keep moving to let people further back view it too. Phill managed to take some pictures and it was from one of these pictures that I decided to create my first picture to stitch transformation.

I wanted to create more of an outline of the Man Engine, so i used Photoshop Elements to edit the picture. I erased a lot of the background data to make it easier to work out which parts were Man Engine and which weren’t!

I quite liked the image on the left, where I’ve used the water paper effect after deleting most of the background. However, I stuck with my original plan, and used the photocopy effect to create a black and white version of the photo.

As this was a big project with much detail, I decided to use a water soluble pen to mark out the details on the edited photograph. With the pen and a window, I traced the design onto calico.

The photo selection, editing and then transfer to calico took around 3 hours. In the afternoon, I began to stitch the design, which took around 4 hours, including short breaks to relax my eyes and wrists! I took a couple of hours to decide how to frame it, looking at different frames online and trialing the design in ones I had at home already. In the end I went for the box frame below, which is a 3D frame, but is the perfect size for it.

Here is the end result. I was considering using some embroidery strands to highlight the puppet’s ropes, but in the end I decided to leave it how it was. I did add its name, the year and my initials – I can’t seem to resist a bit of freehand writing with stitch!

I really enjoyed this make. It was nice to spend the day on it and finish with a completed piece.

If you would like to view how I made this finished piece, I did record the machine embroidery section and have uploaded it onto youtube here. I will warn you that it’s quite a long video despite speeding it up to ten times the actual time it took me!

For more information about the Man Engine, there is a useful article on the BBC website. There was a website set up for the Men Engine’s tour but it now advises to check Facebook and Twitter for an update on what’s next for it. There’s also the Cornish Mining Heritage website, who funded the project.

Recording a card design – the stag card

Post author:clobbercreations
Post published:August 11, 2016
Post category:Free Machine Embroidery Inspiration
Post comments:0 Comments

This week I’ve been quite industrious (well, more than I have been anyway!) and have managed to complete quite a few things for Clobber Creations ranging from fruit protectors to bath hats! However, I want to reflect on the process of recording my free machine embroidery.

I find recordings of free machine embroidery quite mesmerising, and I’d voiced an interest in having a go at some point. My dad pointed out that my camera could record video as well as take pictures, so the lack of video camera was not an issue. I just needed to think about what I wanted to record and when to do it.

I thought that this aspiration was something I would play around with in September. However, I began to put a Christmas card design into practice this week and thought, “why not record it?”

Fortunately, I have a tripod, which meant I could set up the camera behind me to one side. I began with a full recording of the design make, from tracing the design to stitch ‘n’ tear, to colouring in. However, I noticed the image was quite far away, so I had a go at recording zoomed in too.

A few things I learnt from this experience:

Manual focus. I thought that I would want my camera to do auto focus, but for the close up version, it kept focusing on my hands instead of the design. manual focus meant that the camera stayed focused on the area surrounding the machine’s needle.
Time Stretch. This is what it’s called in Adobe Premier Elements. I wanted the clips to fit into the length of a song and my free machining speed is not quite on par with this! Using time stretch helped. The close up video was sped up by 250%, which is a nice speed (and meant that people didn’t believe it was sped up), but the main video had to be sped up by 600%, which is a bit jarring…
Public domain music. I figured that most people wouldn’t want to hear the loud thuds coming from my sewing machine, so I searched for music which I could use for free, which I found at Free Music Archive. I was surprised and delighted to find songs which were appropriate.

This slideshow requires JavaScript.

It is very early for Christmas but I couldn’t resist publishing the videos and card straight away. You can view the close up and start to finish stag videos on youtube. The card is available on etsy.

Comic Strip Stitched

Post author:clobbercreations
Post published:August 4, 2016
Post category:Craft Skills Free Machine Embroidery
Post comments:4 Comments

Recently I decided to revisit my doodles through free motion stitching.

Doodling can happen in all sorts of circumstances. You could be on hold chasing up an order over the phone (or in the case of my first job, being the advisor on the other side of the line), waiting for a meeting to commence, sitting in the audience of a presentation or passing the time on the train. Sometimes the doodling is abstract, and sometimes it turns into a miniature piece of artwork.

Many of the doodles I made when I worked as a customer advisor in a call centre focused on the more abstract sketches of wiggly lines and rough shading, punctuated by the odd cartoon cat. We had green paper to use to make notes while we were on the phone, which we had to throw away as confidential waste at the end of our shift, so I don’t have any of those scribbles anymore, and I doubt there were many of interest from that job either!

However, I have kept some of the sketches I’ve made over the years. I decided to use these to practise my free machine embroidery.

I used a water soluble fabric pen to trace the whole design onto my scrap piece of calico. However, I found that once I got a gauge of the letter sizing, I began to ignore the template. I was concerned about writing with stitch so small, but it worked out well in the end. I probably wouldn’t attempt it when I’m tired though!

Overall, it was an interesting stitch. I find that I prefer joining up letters when I stitch, whereas I found it difficult to allow the writing to be joined up, possibly due to the style and format you normally see comics portrayed in!

I have some more comic strip ideas drafted, including a short series based on being a graduate and job interviews, which I will use to practise my machine embroidery skills with as well!

Personalised Cards!

Post author:clobbercreations
Post published:July 21, 2016
Post category:Craft Skills Free Machine Embroidery Inspiration
Post comments:0 Comments

Last month, I made a couple of individualised cards – one for father’s day and one for someone to give as a leaving card.

The leaving card was personalised by adding the name of the perosn leaving the workplace. I used those fabric felt tip pens to colour it in.

The father’s day card was personalised because it’s always been an ongoing joke that my dad is good at Tetris. We would bring tons of stuff on holiday as kids and he would meticulously work out how to use the space in the car effectively to fit it all in! The design is based off an image I saw online.

Free Motion Embroidery – drawing and writing with my sewing machine

Post author:clobbercreations
Post published:June 23, 2016
Post category:Craft Skills Free Machine Embroidery Stash Busting Upcycling
Post comments:0 Comments

Got your eye on an expensive yet impressive embroidery sewing machine? Think again!

I’ve been admiring the lovely embroidery machines with their numerous stitch options and the possibility of embellishing handmade gifts with a name at the touch of a button (or a few). I remember watching a demonstration of someone programming in a word and then watching in awe as the machine punched out the letters perfectly. All I wanted to do was justify the cost of buying a sewing machine which did this!

Well, my bank budget (and boyfriend) will be relieved to know that I no longer have this impulse! While embroidery machines are amazing – especially the ones where you can put your design into the computer and then transfer it to the machine to stitch it – I discovered free machine embroidery this year through a local course.

I signed up to this course without much thought about what it entailed. I’ve always wanted to do a textile based course, but they’ve always been a long commute away or I hadn’t been able to justify the cost at the time. This course was a reasonable price, within walking distance, and with my new working hours, I could make the time of the session.

Free machine embroidery (also known as free motion embroidery) is when you drop the dog teeth on your sewing machine, which normally propel your fabric in one direction (away from you). You attach a new type of foot – a darning foot – and reduce the upper thread tension a little. You can do it without a presser foot attached, but it’s a lot safer with one! You use an embroidery hoop to keep your material firm and you’re ready to go!

It’s best to move the hoop really slowly and have a play at first. It takes time to learn to keep your hands smooth and steady as you stitch. Originally, I practised drawing lines with the machine, then made loop patterns and some basic shapes.

My first attempt at free motion embroidery!

In the course, we learned shading, appliqué, writing and using water soluble fabric (which is a whole other aspect to discuss another time).

IMG_20160326_085029 — Some shading added to this cat drawing

applique — Some abstract layering of different fabrics using appliqué and free motion embroidery

I really enjoyed all of it, but I am quite fond of writing with stitch. I love looking at people’s handwriting, and I used to enjoy writing stories as a kid, which may explain my fondness of handwriting. I have used writing in combination with other free motion embroidery techniques in producing the designs for some of my Etsy items– cards in particular.

Ultimately, the reason I’m addicted to free motion embroidery is that it is creates personality and individuality in makes. Embroidery sewing machines are programmed to be perfect, but I am always going draw something with stitch a bit different every time I use it, which makes it more interesting.

It’s also a great stash buster!

Here are some useful resources and artists to look at if you fancy a go:

Craftsy has a useful ‘how to’ on creating embroidered works of art. It’s very clearly laid out in simple steps
Poppy Treffrey does some lovely free machine embroidered items, focusing mainly on the seaside and animals
Lou Gardiner is another amazing free machine embroiderer and describes how she creates her work well on the introductory video on her site
Jane Hall focuses on nature in her work
Rosie James has a lovely book on drawing with stitch

Newer Posts